Dalo BRC-Wire Mesh Factory

Profile

DALO BRC/Wire mesh Factory

DALO BRC/Wire Mesh factory operates with one-line production capacity and maintains an impressive production capacity through 12 hours daily operation time. The factory produces BRC/Mesh Wires with a wide variety of specification and offering a wide range of compatibility.

 

Raw materials
Raw materials shall be in the form of rolls of iron wire which shall be Circularly wrapped, and wires have different diameters (5.5, 6.5 and 8) Mm and range from 1 to 1.5 tons depending on the diameter the wire.
The BRC Iron Bucket Bucket Laboratory produces various hazards (4.5 - 5.5 - 5.5 - 7.75 - 6 - 7.5 - 7.5) mm and dimensions (2x6) m
The dimensions of the openings shall be two sizes (15x15 cm) and (20x20) cm.

Configuration and processing
After loading the raw materials and according to the diameter to be used on the tower and then start the process of passing the metal wire through the machine rolls enter into the soap tub to facilitate the sliding of the metal wire on rolls.
The next stage in the production is to pass the metal wire through the unit drag to make it straight and then enter into the dish unit which is done determine the thickness of the metal wire and make it the diameter to be produced as well print the engraved paper on the metal wire.
When the above stages are completed, the metal wire becomes wire straight and thickness required, and from the last steps in the initialization stage are the pieces where the metal wire is cut into pieces of 2 m and the other 6 m.

 

View the PDF Of Dalo BRC Factory

  • Phone : (+964) 07702643385
    (+964) 0770 156 57 28

  • Address :Kirkuk / Chimen / in front of Al qalam university

  • Email :[email protected]